Vancouver, British Columbia - October 15, 2020 (Newsfile Corp.) (Investorideas.com Newswire) Minaurum Gold, Inc (TSXV: MGG) ("Minaurum") is pleased to announce exceptional grades over substantial widths from three of its first four holes targeting the Promontorio vein zone at its Alamos Silver Project in Sonora, Mexico. The holes were targeted below the historical Promontorio mine and demonstrate that high-grade silver mineralization continues at least 100 m below the deepest known workings. Significant highlights include:
"We are very pleased by these high-grade silver results from the Promontorio Vein, historically the second largest producer at Alamos. These results confirm that mining stopped in mineralization and that it continues to depth," stated Darrell Rader, President and CEO of Minaurum. "We are continuing to trace the mineralized shoot through systematic 75- to 150-metre step-outs along strike and down-dip."
Assay highlights are presented in Table 1. Vein and hole locations appear in Figures 1 and 2. The holes and intercepts are depicted in longitudinal section in Figure 3. Drilling at Promontorio continues and results will be released as they are received.
The Promontorio vein zone has become one of Minaurum's highest priority targets, in part because of historic reports acquired earlier this year (see News Release dated February 6th, 2020) showing that the Promontorio Mining Company ceased operations in 1896 due to a drop in the silver price and left the faces in mineralization. The company exploited three principal veins, Veta Guijas, Veta Grande, and Veta del 100, which were mined to a depth of 230 m along 735 m of strike length. Mining focused on high-grading the veins with little effort spent on development, which explains the considerable amount of un-mined mineralization left behind in the workings.
Holes AL20-043 and AL20-046 intersected mineralization below the Promontorio workings. AL20-044 intersected the Promontorio vein zone roughly 100 m down-dip from the intersection in AL20-043 and AL20-048 cut the vein zone about 100 m below AL20-046.
Table 1. Assay highlights from holes AL20-043, AL20-044, AL20-046, and AL20-048 drilled on Promontorio vein zone. Hole depths in metres. True thicknesses of the intersections are estimated to be 70-90% of drilled thicknesses.
Minaurum Gold Inc. (TSXV: MGG) (OTCQX: MMRGF) (FSE: 78M) is a Mexico-focused explorer concentrating on the high-grade Alamos Silver Project in southern Sonora. With a property portfolio encompassing multiple additional district-scale projects, Minaurum is managed by one of the strongest technical and finance teams in Mexico. Minaurum's goal is to continue its founders' legacy of creating shareholder value by making district-scale mineral discoveries and executing accretive mining transactions. For more information, please visit our website at www.minaurum.com and our YouTube Minaurum Video Channel.
ON BEHALF OF THE BOARD
"Darrell A. Rader"
Darrell A. Rader
President and CEO
For more information, please contact:
Sunny Pannu - Investor Relations Manager
(778) 330 0994 or via email at email@example.com
The TSX Venture Exchange does not accept responsibility for the adequacy or accuracy of this news release.
2300 - 1177 West Hastings Street
Vancouver, BC V6E 2K3
Telephone 778 330-0994
Stephen R. Maynard, Vice President of Exploration of Minaurum and a Qualified Person as defined by National Instrument 43-101, reviewed and verified the assay data, and has approved the disclosure in this News Release. Historical data reported in this news release has not been verified.
Cautionary Note Regarding Forward Looking Statements: Certain disclosures in this release constitute forward-looking information. In making the forward-looking statements in this release, Minaurum has applied certain factors and assumptions that are based on Minaurum' s current beliefs as well as assumptions made by and information currently available to Minaurum. Although Minaurum considers these assumptions to be reasonable based on information currently available to it, they may prove to be incorrect, and the forward-looking statements in this release are subject to numerous risks, uncertainties and other factors that may cause future results to differ materially from those expressed or implied in such forward-looking statements. Readers are cautioned not to place undue reliance on forward-looking statements. Minaurum does not intend, and expressly disclaims any intention or obligation to, update or revise any forward-looking statements whether as a result of new information, future events or otherwise, except as required by law.
Quality Assurance/Quality Control: Preparation and assaying of drilling samples from Minaurum's Alamos project are done with strict adherence to a Quality Assurance/Quality Control (QA/QC) protocol. Core samples are sawed in half and then bagged in a secure facility near the site, and then shipped by a licensed courier to ALS Minerals' preparation facility in Hermosillo, Sonora, Mexico. ALS prepares the samples, crushing them to 70% less than 2mm, splitting off 250g, and pulverizing the split to more than 85% passing 75 microns. The resulting sample pulps are prepared in Hermosillo, and then shipped to Vancouver for chemical analysis by ALS Minerals. In Vancouver, the pulps are analyzed for gold by fire assay and ICP/AES on a 50-gram charge. In addition, analyses are done for a 48- element suite using 4-acid digestion and ICP analysis. Samples with silver values greater than 100 g/t; and copper, lead, or zinc values greater than 10,000 ppm (1%) are re-analyzed using 4-acid digestion and atomic absorption spectrometry (AAS).
Quality-control (QC) samples are inserted in the sample stream every 20 samples, and thus represent 5% of the total samples. QC samples include standards, blanks, and duplicate samples. Standards are pulps that have been prepared by a third-party laboratory; they have gold, silver, and base-metal values that are established by an extensive analytical process in which several commercial labs (including ALS Minerals) participate. Standards test the calibration of the analytical equipment. Blanks are rock material known from prior sampling to contain less than 0.005 ppm gold; they test the sample preparation procedure for cross-sample contamination. In the case of duplicates, the sample interval is cut in half, and then quartered. The first quarter is the original sample, the second becomes the duplicate. Duplicate samples provide a test of the reproducibility of assays in the same drilled interval. When final assays are received, QC sample results are inspected for deviation from accepted values. To date, QC sample analytical results have fallen in acceptable ranges on the Alamos project.
This news is published on the Investorideas.com Newswire - a global digital news source for investors and business leaders
Disclaimer/Disclosure: Investorideas.com is a digital publisher of third party sourced news, articles and equity research as well as creates original content, including video, interviews and articles. Original content created by investorideas is protected by copyright laws other than syndication rights. Our site does not make recommendations for purchases or sale of stocks, services or products. Nothing on our sites should be construed as an offer or solicitation to buy or sell products or securities. All investing involves risk and possible losses. This site is currently compensated for news publication and distribution, social media and marketing, content creation and more. Disclosure is posted for each compensated news release, content published /created if required but otherwise the news was not compensated for and was published for the sole interest of our readers and followers. Contact management and IR of each company directly regarding specific questions.
More disclaimer info: https://www.investorideas.com/About/Disclaimer.asp Learn more about publishing your news release and our other news services on the Investorideas.com newswire https://www.investorideas.com/News-Upload/ and tickertagstocknews.com