DEVENS, Mass. - February 12, 2013 (Investorideas.com renewable energy newswire) AMSC (Nasdaq:AMSC), a global solutions provider serving wind and power grid industry leaders, today announced that it has received an order worth in excess of $30 million for wind turbine electrical control systems (ECS) from Inox Wind Limited, part of India's Inox Group of Companies. AMSC expects to begin shipments under this new order during the current quarter and complete shipments in 2014. This is the fifth and largest order that AMSC has received from Inox since the company began volume production of its 2 megawatt (MW) wind turbines, which were licensed from AMSC in May 2009.
"To date, we have installed nearly 250 MW of high-quality, reliable, cost-competitive wind turbines in India -- a solid step toward our objective of becoming India's premiere wind power company," said Devansh Jain, director of Inox Wind Limited. "We are already among India's top five wind energy companies with well respected customers including India's largest wind IPP's, private power distribution companies and prestigious government organizations. We are looking forward to continuing our rapid growth in the Indian market and working with AMSC to help India meet its energy demands with clean, emission-free power."
AMSC's ECS are an integrated, high-performance suite of power electronics systems that include the wind turbine power converter cabinet, internal power supply and various controls. Together, these systems serve as the "brains" of the wind turbine and enable reliable, high-performance operation by controlling power flows, regulating voltage, monitoring system performance, controlling the pitch of the wind turbine blades and the yaw of the turbines to maximize efficiency.
"Since the inception of our relationship, Inox has quickly become one of AMSC's key wind turbine manufacturing partners, and India has emerged as one of our key markets," said Daniel P. McGahn, President and CEO, AMSC. "We are proud to partner with Inox, a company that is dedicated to manufacturing excellence and committed to helping India to bridge its power gap with high-performance wind turbines."
Inox Wind Limited is part of the Inox Group of Companies. Inox Group is a $2 billion+, professionally managed business group, with interests in diverse businesses including Industrial Gases, Refrigerants, Engineering Plastics, Chemicals, Carbon Credits, Cryogenic Engineering, Renewable Energy and Entertainment. The INOX Group employs close to 9,000 people at more than 150 business units across the country and has a distribution network that is spread across more than 50 countries around the globe. Each INOX Group company is characterized by three distinct characteristics - early identification of a winning business idea, building it to a size of dominant market leadership in that segment, and attaining a profit leadership position through cutting-edge efficiency in operations. The Inox Group of Companies, besides Inox Wind Limited, includes Inox Air Products Limited, Gujarat Fluorochemicals Limited, Inox India Limited, Inox Renewables Limited, Inox Leisure Limited and Fame India limited. More information is available at www.inoxwind.com.
About AMSC (NASDAQ: AMSC)
AMSC generates the ideas, technologies and solutions that meet the world's demand for smarter, cleaner … better energy. Through its Windtec(TM) Solutions, AMSC provides wind turbine electronic controls and systems, designs and engineering services that reduce the cost of wind energy. Through its Gridtec(TM) Solutions, AMSC provides the engineering planning services and advanced grid systems that optimize network reliability, efficiency and performance. The company's solutions are now powering gigawatts of renewable energy globally and enhancing the performance and reliability of power networks in more than a dozen countries. Founded in 1987, AMSC is headquartered near Boston, Massachusetts with operations in Asia, Australia, Europe and North America. For more information, please visit www.amsc.com.
AMSC, Windtec, and Gridtec are trademarks or registered trademarks of American Superconductor Corporation. All other brand names, product names, trademarks or service marks belong to their respective holders.
This press release contains forward-looking statements within the meaning of Section 21E of the Securities Exchange Act of 1934, as amended (the "Exchange Act"). Any statements in this release about future expectations, plans and prospects for the company, including without limitation, our expectations regarding the recognition of revenue associated with the new order, the timing of our future ECS shipments and the performance of our products, and other statements containing the words "believes," "anticipates," "plans," "expects," "will" and similar expressions, constitute forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Such forward-looking statements represent management's current expectations and are inherently uncertain.
There are a number of important factors that could materially impact the value of our common stock or cause actual results to differ materially from those indicated by such forward-looking statements. Such factors include: Our success in addressing the wind energy market is dependent on the manufacturers that license our designs; we may not realize all of the sales expected from our backlog of orders and contracts; we may require additional funding in the future and may be unable to raise capital when needed; our business and operations would be adversely impacted in the event of a failure or security breach of our information technology infrastructure; our success is dependent upon attracting and retaining qualified personnel and our inability to do so could significantly damage our business and prospects; we rely upon third-party suppliers for the components and subassemblies of many of our Wind and Grid products, making us vulnerable to supply shortages and price fluctuations, which could harm our business; many of our revenue opportunities are dependent upon subcontractors and other business collaborators; if we fail to implement our business strategy successfully, our financial performance could be harmed; problems with product quality or product performance may cause us to incur warranty expenses and may damage our market reputation and prevent us from achieving increased sales and market share; our contracts with the United States government are subject to audit, modification or termination by the United States government and include certain other provisions in favor of the government; the continued funding of such contracts remains subject to annual congressional appropriation which, if not approved, could reduce our revenue and lower or eliminate our profit; we may acquire additional complementary businesses or technologies, which may require us to incur substantial costs for which we may never realize the anticipated benefits; many of our customers outside of the United States are, either directly or indirectly, related to governmental entities, and we could be adversely affected by violations of the United States Foreign Corrupt Practices Act and similar worldwide anti-bribery laws outside the United States; we have limited experience in marketing and selling our superconductor products and system-level solutions, and our failure to effectively market and sell our products and solutions could lower our revenue and cash flow; we have a history of operating losses, and we may incur additional losses in the future; our operating results may fluctuate significantly from quarter to quarter and may fall below expectations in any particular fiscal quarter; we may require additional funding in the future and may be unable to raise capital when needed; our new debt obligations include certain covenants and other events of default. Should we not comply with the covenants or incur an event of default, we may be required to repay our debt obligations in cash, which could have an adverse effect on our liquidity; we have recorded a liability for adverse purchase commitments with certain of our vendors; should we be required to settle these liabilities in cash, our liquidity could be adversely affected; if we fail to maintain proper and effective internal controls over financial reporting, our ability to produce accurate and timely financial statements could be impaired and may lead investors and other users to lose confidence in our financial data; we may be required to issue performance bonds or provide letters of credit, which restricts our ability to access any cash used as collateral for the bonds or letters of credit; changes in exchange rates could adversely affect our results from operations; growth of the wind energy market depends largely on the availability and size of government subsidies and economic incentives; we depend on sales to customers in China, and global conditions could negatively affect our operating results or limit our ability to expand our operations outside of China; changes in China's political, social, regulatory and economic environment may affect our financial performance; our products face intense competition, which could limit our ability to acquire or retain customers; our international operations are subject to risks that we do not face in the United States, which could have an adverse effect on our operating results; adverse changes in domestic and global economic conditions could adversely affect our operating results; we may be unable to adequately prevent disclosure of trade secrets and other proprietary information; our patents may not provide meaningful protection for our technology, which could result in us losing some or all of our market position; the commercial uses of superconductor products are limited today, and a widespread commercial market for our products may not develop; there are a number of technological challenges that must be successfully addressed before our superconductor products can gain widespread commercial acceptance, and our inability to address such technological challenges could adversely affect our ability to acquire customers for our products; we have not manufactured our Amperium wire in commercial quantities, and a failure to manufacture our Amperium wire in commercial quantities at acceptable cost and quality levels would substantially limit our future revenue and profit potential; third parties have or may acquire patents that cover the materials, processes and technologies we use or may use in the future to manufacture our Amperium products, and our success depends on our ability to license such patents or other proprietary rights; our technology and products could infringe intellectual property rights of others, which may require costly litigation and, if we are not successful, could cause us to pay substantial damages and disrupt our business; we have filed a demand for arbitration and other lawsuits against our former largest customer, Sinovel, regarding amounts we contend are overdue. We cannot be certain as to the outcome of these proceedings; we have been named as a party to purported stockholder class actions and stockholder derivative complaints, and we may be named in additional litigation, all of which will require significant management time and attention, result in significant legal expenses and may result in an unfavorable outcome, which could have a material adverse effect on our business, operating results and financial condition; our 7% convertible note contains provisions that could limit our ability to repay the note in shares of common stock and should the note be repaid in stock, shareholders could experience significant dilution; our common stock has experienced, and may continue to experience, significant market price and volume fluctuations, which may prevent our stockholders from selling our common stock at a profit and could lead to costly litigation against us that could divert our management's attention; and new regulations related to conflict-free minerals may force us to incur additional expenses. These and the important factors discussed under the caption "Risk Factors" in Part II. Item 1A and Part 1. Item 1A of our Form 10-K/A for the fiscal year ended March 31, 2012, and our other reports filed with the SEC, among others, could cause actual results to differ materially from those indicated by forward-looking statements made herein and presented elsewhere by management from time to time. Any such forward-looking statements represent management's estimates as of the date of this press release. While we may elect to update such forward-looking statements at some point in the future, we disclaim any obligation to do so, even if subsequent events cause our views to change. These forward-looking statements should not be relied upon as representing our views as of any date subsequent to the date of this press release.
Published at the Investorideas.com Newswire - Big ideas for Global Investors
Disclaimer/ Disclosure:The Investorideas.com newswire is a third party publisher of news and research as well as creates original content as a news source. Original content created by investorideas is protected by copyright laws other than syndication rights. Investorideas is a news source on Google news and Linkedintoday plus hundreds of syndication partners. Our site does not make recommendations for purchases or sale of stocks or products. Nothing on our sites should be construed as an offer or solicitation to buy or sell products or securities. All investment involves risk and possible loss of investment. This site is currently compensated by featured companies, news submissions, content marketing and online advertising. Contact each company directly for press release questions. Disclosure is posted on each release if required but otherwise the news was not compensated for and is published for the sole interest of our readers. More disclaimer info: http://www.investorideas.com/About/Disclaimer.asp
BC Residents and Investor Disclaimer : Effective September 15 2008 - all BC investors should review all OTC and Pink sheet listed companies for adherence in new disclosure filings and filing appropriate documents with Sedar. Read for more info: http://www.bcsc.bc.ca/release.aspx?id=6894. Global investors must adhere to regulations of each country.